Galvanized Steel Strips And Tapes

Anbao Corp.

Galvanized Steel Strips And Tapes

Finish: The surface of Galvanized steel strips is free form scales, seams, Zinc flakes and other surface

imperfection. The zinc coating shall be smooth and continuous.

Thickness: 0.15 mm to 2.00 mm

Width: 4 mm to 1250 mm

General Technical Specifications:
Tensile Strength: 28 to 50 kgf/mm²
Elongation: Minimum 10% on 250 mm gauge length.

Zinc Coating: Minimum 110 g/m² (total weight on all four sides). However, this can be increased

to suit customer's requirements.

Galvanized Steel Sheets:

	PLAIN	SKIN PASSED	CORRUGATED	GALVANNEAL
Thickness (mm)	0.10 to 2.00	0.30 to 2.00	0.12 to 1.20	0.30 to 2.00
Width (mm)	Up to 1250	Up to 1250	660,762,800,900,1050	Upto 1250
Cut-To-Length (mm)	Up to 4500	Up to 4500	Up to 4100 ( 16")	Upto 4500
Surface Finish	Regular And minimum Spangles	Mate with Zero/minimum Spangles	Regular Spangles	Matte
Coating Mass (Gms/m2)	80 to 300	80 to 300	80 to 300	80 to 300
Grades	Soft/Lock Forming	EDD, DD & D ( SPCEN, SPCD, SPCC)	Roofing	EDD,DD&D

Packing Options
Galvanized steel coils are wrapped in strong water proof sea-worthy packing and are in palletized loads.

Other types of packing can be done as required.

Normal Delivery Schedules

Delivery Form: Galvanized Steel Strips are supplied in continuous lengths in ribbon wound coils.

Coil Size: Inside Diameter- minimum 150 mm, Outside Diameter - Within 400-800.

Product Testing
Galvanized Steel Strips are manufactured according to customer's requirements and specifications.

Our products conform to the following standards:

Address:1302-1312, Tower A, Jinming International, No. 3 Liupanshan Road, ETDZ, Qinhuangdao, P.R. China 066000
Tel:0086-335-3893600 Fax:0086-335-3870760