6x36 (14/7+7/7/1) - Fibre Core Wire Rope

6x36 is a flexible general engineering wire rope readily available in galvanised, unglavanised and marine grade stainless steel. The wire rope has an equal lay construction (warrington seale) and achieves a superior breaking load to the 6x19 construction range. The construction has been designed to give a flexible rope with a good fatigue life. A 6x36 wire rope is available with either FC (fibre core) or IWRC (independent wire rope core) and is used for a wide range of applications, examples of which are shown below:

• Wire rope slings
• General engineering applications
• Crane ropes
• Hoist rope
• Winch ropes
• Holding and closing ropes for grab cranes

• Tow ropes
• Luffing ropes
• Pursing wires
• Mooring ropes
• Lifeboat falls

• Wire rope rigging applications

Breaking Load Table

Nominal Diameter	Approximate Mass	Minimum breaking loads -1770 Mpa
[mm]	[kg/m]	[kN]
8	0.235	37.40
9	0.297	47.30
10	0.367	58.40
11	0.444	70.70
12	0.528	84.10
13	0.616	98.70
14	0.725	114.50
15	0.814	131.40
16	0.925	149.50
18	1.180	189.00
19	1.320	211.00
20	1.480	234.00
22	1.760	283.00
24	2.110	336.00
26	2.470	395.00
28	2.810	458.00
30	3.240	526.00
32	3.680	598.00
34	4.170	675.00
36	4.640	757.00
38	5.190	843.00
40	5.790	935.00
42	6.410	1030.00
44	7.030	1131.00
46	7.760	1236.00
48	8.380	1346.00

Minimum Order Quantity: 1000meters

HOME | ABOUT US | PRODUCTS | Factory Video | Past Exhibitions | Send Inquiry | CONTACT US |

Address:1302-1312, Tower A, Jinming International, No. 3 Liupanshan Road, ETDZ, Qinhuangdao, P.R. China 066000
Tel:0086-335-3893600 Fax:0086-335-3870760