7x7 (6/1) - Marine Grade Stainless Steel Wire Rope

7x7 AISI316 (304) stainless steel wire rope is used for a wide range of applications. More flexible than 1x19 but more rigid than 7x19, the 7x7 construction is often used where 1x19 lacks enough flexibility for an application or where 7x19’s weaker breaking load is too low for an application. Used extensively throughout the marine industry as well as for general engineering applications, 7x7’s excellent breaking load and flexibility in the smaller diameters make it a favourite for control cable and a variety of marine rigging applications, examples of which are shown below:

• Control cables
• Guardrail
• Standing rigging
• Running rigging
• Steering cable

• Marine/Saltwater environment
• Sewage treatment works
• Davit ropes

• Wire rope slings

Breaking Load Table

Nominal Diameter	Approximate Mass	Minimum breaking loads - 1570 Mpa
[mm]	[kg/m]	[kN]
2.0	0.016	2.44
2.5	0.023	3.81
3.0	0.034	5.48
4.0	0.060	9.75
5.0	0.095	15.20
6.0	0.136	21.90
7.0	0.185	29.80
8.0	0.242	39.00
10.0	0.378	60.90
12.0	0.545	87.70
14.0	0.741	119.40

Minimum Order Quantity: 1000meters

HOME | ABOUT US | PRODUCTS | Factory Video | Past Exhibitions | Send Inquiry | CONTACT US |

Address:1302-1312, Tower A, Jinming International, No. 3 Liupanshan Road, ETDZ, Qinhuangdao, P.R. China 066000
Tel:0086-335-3893600 Fax:0086-335-3870760